Amcrest General 720P(V2) Mini 1U Series User Manual page 154

Please refer to the following sheet for detailed information.
Parameter
Enable tour
Interval
Split
Motion
tour/Alarm
tour
5.8.5.2.3 Multi Preview
The multi preview interface is shown as in Figure 5-62. Here you can enable the multi preview function
and set the corresponding information.
Please refer to the following sheet for detailed information.
Parameter
Enable
Figure 5-61
Function
Check the box here to enable tour function.
Here is where you adjust the interval between view changes. The
value ranges from 5 to 120s. The default setup is 5s.
Here you can set the window mode and channel group. The system
can support 1/4/8-window according to device channel amount.
Here you can set the motion detect tour/alarm tour window mode.
The system supports 1/8-window now.
Figure 5-62
Function
Check the box here to enable the multi preview function.
145