Table of Contents
Advertisement
5.8.3.1.2 Video Loss
The video loss interface is shown as in Figure 5-48.
After video analysis, the system can generate a video loss alarm when the detected moving signal
reaches the sensitivity you set here.
Please note, video loss does not support anti-dither, sensitivity, or region setup. For the rest of the
settings, please refer to chapter 5.8.3.1.1 motion detect for detailed information.
5.8.3.1.3 Camera Masking
The camera masking interface is shown as in Figure 5-49.
After video analysis, the system can generate a tampering alarm when the detected moving signal
reaches the sensitivity you set here.
For detailed settings, please refer to chapter 5.8.3.1.1 motion detect for detailed information.
5.8.3.2 Abnormality
It includes multiple types: No disk, disk error, disk no space, net disconnection, IP conflict, and MAC
conflict. See Figure 5-50 and Figure 5-51.
Figure 5-48
Figure 5-49
137
Advertisement
Table of Contents
