Table of Contents
Advertisement
Please refer to the following sheet for detailed information.
Parameter
Channel
Pre-record
Redundancy Check the box here to enable the redundancy function. Please note
Snapshot
Holiday
Setup
(Sunday to
Saturday)
Setup
(Holiday)
Copy
5.8.4.2 Local Storage
The local storage interface is shown as in Figure 5-55. Here you can see HDD information. You can also
operate the read-only, read-write, redundancy (if there is more than one HDD), and format operation.
Figure 5-54
Function
Please select a channel from the dropdown list.
Please input pre-record time here. The value ranges from 0 to 30.
this function is null if there is only one HDD.
Check the box here to enable the snapshot function.
Check the box here to enable the holiday function.
Click the Setup button and you can set the record period. See Figure
5-53. There are six periods in one day. If you do not check the date at
the bottom of the interface, the current setup is for today only.
Please click the Save button and then exit.
Click the Setup button and you can set the record period. See Figure
5-53. There are six periods in one day. If you check the Holiday box,
the current channel will record as your holiday setup here.
The copy function allows you to copy one channel setup to another.
After setting in channel, click the Copy button and you can go to
interface Figure 5-54. You can see the current channel name is grey
such as channel 1. Now you can select the channel you want to paste
to such as channel 5/6/7. If you want to save the current setup of
channel 1 to all channels, you can click the first box "ALL". Click the
save button to save current copy setup. Click the save button in the
Encode interface and the copy function succeeds.
140
Advertisement
Table of Contents
