Pattern Setup
In Figure 4-107, click the Pattern button and input pattern number.
Click the Begin button to start the direction operation. Or you can go back to Figure 4-7 to operate
zoom/focus/iris/direction operation.
In Figure 4-10, click End button to complete the pattern.
Scan Setup
In Figure 4-10, click Scan button.
Use direction buttons to set the camera's left limit and then click Left button.
Use direction buttons to set the camera's right limit and then click Right button. Now the scan setup
process is complete. See Figure 4-21
4.4.2.2 Call PTZ Function
Call Preset
Figure 4-20
Figure 4-21
35