Table of Contents
Advertisement
S
S
UPER
ERVER 5038ML-H12TRF User's Manual
1-2
Motherboard Features
The 5038ML-H12TRF includes a total of 12 X10SLE-F single processor mother-
boards, which are based on the Intel C224 PCH chipset. Each motherboard con-
stitutes a node in the system. Below are the main features of the X10SLE-F. (See
Figure 1-1 for a block diagram of the chipset.)
Processors
Each X10SLE-F supports a single Intel® Xeon® E3-1200 v3 processor (up to 80W)
or 4th Gen Core i3, Pentium®, Celeron® processor in an LGA 1150 socket (Socket
H3). Please refer to the motherboard description pages on our web site for a com-
plete listing of supported processors (www.supermicro.com).
Memory
Each X10SLE-F has four DIMM slots that can support up to 32 GB of ECC DDR3-
1600/1333 UDIMM (Unbuffered), VLP (Very Low Profi le) memory. This equates to a
maximum of 384 GB for the system. Memory modules of the same size and speed
should be used. See Chapter 5 for details.
SATA
A SATA controller integrated into the chipset provides a four-port SATA 3.0 sub-
system on each node. Each node supports two 3.5" SATA 3.0 HDDs or four 2.5"
SATA 3.0 hard drives.
Rear I/O Ports
The rear I/O panel on each node includes one KVM connector, two Gb Ethernet
LAN ports, one dedicated IPMI LAN port, a power LED and buttons for UID (Unit
Identifi cation) and power.
IPMI
IPMI (Intelligent Platform Management Interface) is a hardware-level interface speci-
fi cation that provides remote access, monitoring and administration for Supermicro
server platforms. IPMI allows server administrators to view a server's hardware
status remotely, receive an alarm automatically if a failure occurs, and power cycle
a system that is non-responsive. Each node features IPMI 2.0 with KVM over a
dedicated LAN port.
1-2
Advertisement
Table of Contents
