Processor And Heatsink Installation; Installing An Lga1150 Processor - Supero MicroCloud 5038ML-H12TRF User Manual

S S
UPER ERVER 5038ML-H12TRF User's Manual
5-5

Processor and Heatsink Installation

Warning: Avoid placing direct pressure to the top of the processor.
Notes:
•
Always connect the power cord last and always remove it before adding, re-
moving or changing any hardware components. Make sure that you install the
processor into the CPU socket before you install the CPU heatsink.
•
If you buy a CPU separately, make sure that you use an Intel-certifi ed multi-
directional heatsink only.
•
Make sure to install the motherboard into the chassis before you install the
CPU heatsinks.
•
When receiving a motherboard without a processor pre-installed, make sure that
the plastic CPU socket cap is in place and none of the socket pins are bent;
otherwise, contact your retailer immediately.
•
Refer to the Supermicro web site for updates on CPU support.

Installing an LGA1150 Processor

1. Gently press down the load plate
handle and push it outward (to the
right side) to unlock it.
2. Once the load plate handle is
unlocked, gently lift the handle to
open the load plate.
Load Plate
Handle Lock
Load Plate Handle
5-4