Supero MicroCloud 5038ML-H12TRF User Manual page 92

TPM State
Select Enabled to use TPM (Trusted Platform Module) settings for system data
security. The options are Disabled and Enabled.
Note: The system will reboot for the change on TPM State to take effect.
Pending Operation
Use this item to schedule a TPM-related operation to be performed by a security
device for TPM support. The options are None, Enable Take Ownership, Disable
Take Ownership, and TPM Clear.
Note: The computer will reboot to carry out a pending TPM operation and
change TPM state for a TPM device.
Current Status Information
This feature indicates the status of the following TPM items:
TPM Enabled Status
TPM Active Status
TPM Owner Status
Intel TXT (LT) Support
Intel TXT (Trusted Execution Technology) helps protect against software-based
attacks to ensure the security, confi dentiality, and integrity of all data stored in the
system. The options are Enabled and Disabled.

Super IO Confi guration
Super IO Chip NCT6776D

Serial Port 1 Confi guration
Select Enabled to enable the onboard serial port. The options are Enabled
and Disabled.
Change (Serial Port 1) Settings
This option specifi es the base I/O port address and the Interrupt Request
address of Serial Port 1. Select Auto to let the BIOS automatically assign
the base I/O and IRQ address.
The options for Serial Port 1 are Auto, (IO=3F8h; IRQ=4), (IO=3F8h;
IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12), (IO=2F8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11,
12), (IO=3E8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12) and (IO=2E8h; IRQ=3,
4, 5, 6, 7, 9, 10, 11, 12).
7-19
Chapter 7: BIOS