Table of Contents
Advertisement
S
S
UPER
ERVER 5018R-M/5018R-MR User's Manual
1-2
Motherboard Features
At the heart of the SuperServer 5018R-M/5018R-MR lies the X10SRi-F, a single
processor motherboard based on the Intel® C610 Express chipset. Below are the
main features of the X10SRi-F (see Figure 1-1 for a block diagram of the chipset).
Processors
The X10SRi-F supports a single Intel® Core™ i7 processor in an LGA2011 socket.
Please refer to the motherboard description pages on our web site for a complete
listing of supported processors.
Memory
The X10SRi-F has eight DIMM sockets that can support up to 256 GB of RDIMM
(Registered DIMMs) or up to 512 GB of LRDIMM (Load-Reduced DIMMs) ECC
DDR4-2133/1866/1600/1333 memory. Please refer to Chapter 5 for installing
memory.
Serial ATA
A SATA controller is integrated into the C610 chipset to support ten SATA 3.0 (6
Gb/s) ports. RAID 0, 1, 5 and 10 levels supported.
I/O Ports
The rear I/O ports include one COM port, a VGA (monitor) port, two USB 3.0 ports,
two USB 2.0 ports, and two gigabit Ethernet ports. A dedicated IPMI LAN port is
also included.
Graphics Controller
The X10SRi-F features an integrated AST 2400 graphics controller.
1-2
Advertisement
Table of Contents
