Motherboard Features; Processors; Memory; Pcie Expansion Slots - Supero SUPERSERVER 1018R-WC0R User Manual

S S
UPER ERVER 1018R-WC0R User's Manual
1-2

Motherboard Features

The SuperServer 1018R-WC0R is built around the X10SRW-F, a single processor
motherboard based on the Intel
of the X10SRW-F. (See Figure 1-1 for a block diagram of the chipset.)

Processors

The X10SRW-F supports a single Intel E5-2600/E5-1600 v3 Series processor in an
LGA2011 socket (Socket R3). Please refer to the motherboard description pages on
our web site for a complete listing of supported processors (www.supermicro.com).

Memory

The X10SRW-F has eight DIMM slots that can support up to 512 GB of ECC/non-
ECC Load-Reduced (LRDIMM), up to 256 GB of ECC Registered (RDIMM) or up
to 64 GB of unbuffered (UDIMM) DDR4-2133/1600/1333 memory. See Chapter 5
for details.

PCIe Expansion Slots

Two riser cards (RSC-R1UW-2E16-O-P and RSC-R1UW-E8R-O-P) located can
support two PCIe x16 cards and one PCIe x8 card, respectively. See Chapter 5
Section 6 for details.

Serial ATA

A SATA controller is integrated into the chipset to provide ten SATA 3.0 (6/Gbps)
ports, which are RAID 0, 1, 5 and 10 supported. The SATA drives are hot-swappable
units.
Note: two SATA DOM ports are also included on the motherboard.

Rear I/O Ports

Ports on the I/O backplane include a COM port, a VGA port, two USB 3.0 ports,
two USB 2.0 ports, two gigabit Ethernet ports and one dedicated IPMI port. A UID
(Unit Identifier) button and LED are also included beside the VGA port..
C612 Express chipset. Below are the main features
®
1-2