Microlp Expansion Module - Supero MicroCloud 5038ML-H12TRF User Manual

S S
UPER ERVER 5038ML-H12TRF User's Manual
5-7

MicroLP Expansion Module

Each of the 12 nodes in the 5038ML-H12TRF has one MicroLP slot, which can
support a single MicroLP expansion module. Follow the instructions below to install
this module.
Installing a MicroLP Expansion Module
1. Power-down the node using that node's individual power button and remove it
from the system as described in Chapter 6.
2. Open the PCI slot clip and remove the PCI slot shield.
3. Open the PCI slot clip in the rear of the motherboard node.
4. Remove the PCI slot shield.
5. The MicroLP module consists of a MicroLP card, a riser card and a mounting
bracket. Simply insert the module into the MicroLP expansion slot.
6. Slide the expansion cards bracket into the PCI card slot and fi t it with the
opening in the rear of the node.
7. Close the PCI card slot clip to secure the expansion card.
Note: The PCI slot shields protect the motherboard and its components from EMI
and aid in proper ventilation, so make sure there is always a shield covering each
unused slot.
5-10