Table of Contents
Advertisement
Figure 2-2. Securing the Rails to the Rack
Note: These handles are optional and need only be installed when mounting the
system into a short rack. When mounting into a deep rack, they are unnecessary
and regular screws should be used instead of thumbscrews.
6. With one person on either side, lift the system and slide it into the installed
rails.
7. After pushing the enclosure all the way into the rack, use two roundhead
screws on each side of the server to lock it into place.
Warning: do not pick up the server with the front handles. They are de-
signed to pull the system from a rack only.
Chapter 2: Server Installation
2-5
Advertisement
Table of Contents
