Table of Contents
Advertisement
S
S
UPER
ERVER 1028GQ-TR(T) User's Manual
1-2
Motherboard Features
At the heart of the SuperServer 1028GQ-TR(T) lies the X10DGQ, a dual processor
motherboard based on the Intel PCH C612 chipset. Below are the main features of
the motherboard. (See Figure 1-1 for a block diagram of the chipset.)
Processors
The motherboard supports single or dual Intel E5-2600 v3 Series processors in
LGA2011 sockets (Socket R3). Refer to the Supermicro web site for a complete
listing of supported processors (www.supermicro.com).
Memory
The motherboard has 16 sockets that can support up to 1 TB of LRDIMM (Load-
Reduced DIMMs) or 512 GB of RDIMM (Registered DIMMs). Memory type is ECC
DDR4 SRAM, 2133/1866/1600 MHz.
Onboard Serial ATA
The motherboard has six SATA 3.0 connections from Intel PCH (SATA1-6) with two
SATA ports used for SuperDOMs (Device-on-Module) with power supply built in.
RAID 0, 1, 5 and 10 are supported by Intel PCH.
Input/Output Ports
The rear I/O ports include two USB 3.0 ports, a dedicated IPMI LAN port, and two
LAN ports. The 1028GQ-TR model offers two Gigabit LAN ports; the 1028GQ-TRT
model features two 10-Gigabit LAN ports. These are all presented on the chassis
rear by means of the add-on module.
A VGA port is also available on the chassis rear.
Also available on the motherboard are one COM header and a header for two
USB 2.0 ports.
Graphics Controller
The motherboard features an integrated ASpeed AST2400 BMC graphics chip.
1-2
Advertisement
Table of Contents
