Installing The High Temperature Design - ABB FSM4000 Operating Instruction

Electrical connection
Fig. 33
1 Packaging bag
2 Drying bag
3 Clamp
Pos: 29.9 /==== Leeres Modul mit einer Absatzmarke, DS, 1-spaltig ==== @ 2\mod_1153381574375_0.doc @ 35553
Pos: 29.10 /Überschriften/1.1.1/1-spaltig/Einbau der Hochtemperatur-Ausführung @ 15\mod_1196072293328_3101.doc @ 142704
5.2.3

Installing the high temperature design

Pos: 29.11 /Elektrischer Anschluss/Durchfluss/FSM4000/Einbau der Hochtemperatur-Ausführung @ 15\mod_1196072454125_3101.doc @ 142727
When installing the high temperature design with a fluid temperature of max. 180 °C, the
connection box for sizes DN 125 [5"] and larger is separated from the lower section of the
flowmeter sensor by a piece of pipe. This provides complete thermal insulation between the
flowmeter sensor and connection box. The pipeline and flowmeter sensor insulation must be
performed after installation according to the following illustration.
Fig. 34
1 Insulation
Pos: 29.12 /======= Seitenumbruch ======== @ 0\mod_1126532365768_3101.doc @ 3830
38
4 Sealing compound
5 Filling height
1
FSM4000
G00557
D184B140U02