ABB FSM4000 Operating Instruction page 86

Parameterization
Submenu/parameter
Submenu
Status
Error register
Number: 1
Warning register
Number: 2
Mains interrupts
0
HMx ----------
HMi ----------
EMx ----------
EMi ----------
WMx ----------
WMi ----------
ConWarn -----
-----
ConErr---------
86
Value range
C (Current)
Ext. Database
Reset: Enter
Help text: Enter
0
Empty pipe
3 (Pending)
* Test Mode *
Reset: Enter
Help text: Enter
2
Totalizer reset
Comment
After calling up the error register, the error register text is
displayed with the number of pending errors. Press
ENTER again to display the pending errors with error
number and text. If you press ENTER again, you will be
asked whether you want to reset the error or view the
help text. Select STEP to display all of the pending errors
with error numbers and text. Press ENTER to reset the
pending errors.
After calling up the warning register, the warning register
text is displayed with the number of pending warnings.
Press ENTER again to display the pending warnings with
warning number and text. If you press ENTER again, you
will be asked whether you want to reset the warnings or
view the help text. Select STEP to display all of the
pending warnings with warning numbers and text. Press
ENTER to reset the pending warnings.
Display the count of mains interrupts during operation.
Status register for enhanced diagnostics.
For additional information, see chapter "7.4 Additional
information regarding use of enhanced diagnostic
functions".
FSM4000 D184B140U02