Configuring An Expansion Card - Viglen Vig430p Manual

Configuring an expansion card

After installing the expansion card, configure the card by adjusting the software settings.
1. Turn on the system and change the necessary BIOS settings, if any.
2. Install the software drivers for the expansion card.
PCI Slots
There are two 64-bit PCI slots on this Motherboard. The slots support PCI cards such as a LAN
card, SCSI card, USB card, and other cards that comply with PCI specifications.
Figure 27: Installing a PCI card
PCI Express x16 Slot
This Motherboard supports PCI Express x16 graphic cards that comply with the PCI Express
specifications.
Figure 44 shows a graphics card installed on the PCI Express x16 slot.
Figure 28: Install a PCI Express x16 card
40
Vig430P Motherboard Manual