Viglen Vig430p Manual page 36

3. Hold the CPU at the north and south edges.
4. Align the CPU key, which is the semi-circle cut-out against the socket key, which is the notch
below the gold colour dot, on the side of the socket.
5. When both CPU and the sockets are aligned, carefully lower the CPU straight down into the
socket (Do not rub the CPU against the surface of the socket or its pins to avoid damaging
the CPU or the socket.)
Figure 19: Holding the CPU
Figure 20: Aligning the CPU
Figure 21: Aligning the CPU
Vig430P Motherboard Manual
35