Expansion Slots (Pci & Agp) - Viglen VIG556M Manual

Expansion Slots
The motherboard has two PCI slots and one Accelerated Graphics Port (AGP) slot.
To install and configure an expansion card:
1. Install an expansion card following the instructions that came with the chassis.
2. Turn on the system and change the necessary BIOS settings, if any. See Chapter
4, System BIOS.
3. Assign an IRQ to the card. Refer to the tables below.
4. Install the drivers and/or software applications for the expansion card according
to the card documentation.
Table 6: Standard IRQ Assignment
IRQ
0
1
2
4*
5*
6
7*
8
9*
10*
11*
12*
13
14*
15*
* These IRQs are usually available for ISA or PCI devices
V1.0
Figure 6: Removing Memory Modules
Priority Standard Function
1 System Timer
2 Keyboard Controller
N/A Programmable Interrupt
12 Communication Port (COM1)
13 IRQ Holder for PCI steering
14 Floppy Disk Controller
15 Printer Port (LPT1)
3 System CMOS/Real Time Clock
4 IRQ Holder for PCI steering
5 Advanced AC'97 CODEC
6 Standard PCI Graphics Adapter (VGA)
7 PS/2 Compatible Mouse Port
8 Numeric Data Processor
9 Primary IDE Channel
10 Secondary IDE Channel
VIG556M Motherboard Manual
29