Viglen Vig430p Manual page 61

9. During the system boot-up, press the <Ctrl> and <I> keys simultaneously to run the Intel
RAID Configuration Utility when prompted by the following message: Press <Ctrl> <I> for the
Intel RAID Configuration Utility.
Note: The Intel RAID Configuration Utility is only available for systems with two or more drives
installed. The Intel RAID Utility screen will not display in systems with one drive installed.
Using the Intel ICH10R SATA RAID Utility Program
Creating, Deleting and Resetting RAID Volumes:
1) After the system exits from the BIOS Setup Utility, the system will automatically reboot. The
following screen appears after Power-On Self Test.
Note: All graphics and screen shots shown in the manual are for reference only. Your screens
may or many won't look exactly the same as the graphics shown in this manual.
2. When you see the above screen, press the <Ctrl> and the <I> keys simultaneously to have
the main menu of the SATA RAID Utility appear:
Figure 30: Entering the Intel ICH10R SATA Utility
Vig430P Motherboard Manual
60