Viglen Vig430p Manual page 62

Creating a RAID 0 Volume
1. Select "Create RAID Volume" from the main menu and press the <Enter> key.
The following screen will appear:
2. Specify a name for the RAID 0 set and press the <Tab> key or the <Enter> key to go to the
next field. (You can use the <Esc> key to select the previous menu.)
3. When RAID Level item is highlighted, press the <Up Arrow>, <Down Arrow> keys to select
RAID 0 (Stripe) and hit <Enter>.
4. When the Disks item is highlighted, press <Enter> to select the HDD to configure as RAID.
The following pop-up screen displays:
5. Use the <Up Arrow>, <Down Arrow> keys to highlight a drive and press <Space> to select it.
A triangle appears to confirm the selection of the drive.
Figure 31: Creating a RAID 0 Volume
Figure 32: Selecting Drives for RAID 0 Volume
Vig430P Motherboard Manual
61