Motherboard Connectors - Viglen Vig430p Manual

Motherboard Connectors

There are connectors on the Motherboard for FAN, Power supply, CD audio, & Front Panel
Connectors. The location and/or details of these connections are shown below.
 Front panel connections
The following are all connectors situated along the right edge of the Motherboard. They are
often connected to buttons and LED's situated on the front panel.
A- NMI
This non-maskable interrupt
B- Power LED
This 2-pin connector is for the system power LED. Connect the chassis power LED cable to this
connector. The system power LED lights up when you turn on the system power, and blinks
when the system is in sleep mode.
C- HDD (Hard disk drive) LED
This 2-pin connector is for the HDD activity LED. Connect the HDD Activity LED cable to this
connector. The IDE LED lights up or flashes when data is read from or written to the HDD.
D- NIC1/NIC2 LED Indicators
Figure 5: Front panel connections
Vig430P Motherboard Manual
24