Viglen Vig430p Manual page 64

6. When asked "Are you sure you want to create this volume (Y/N), press "Y" to create the
RAID volume, or type "N" to go back to the Create Volume menu.
Creating a RAID 10 (RAID 1+RAID 0)
1. Select "Create RAID Volume" from the main menu and press the <Enter> key.
The following screen will appear:
2. Specify a name for the RAID 10 set and press <Enter>.
3. When RAID Level item is highlighted, use the <Up Arrow>, <Down Arrow> keys to select
RAID 10 (RAID1 + RAID0) and hit <Enter>.
4. When the Stripe Size is highlighted, use the <Up Arrow>, <Down Arrow> keys to select the
stripe size from 4 KB to 128 KB for your RAID 10 and hit <Enter>. The default setting is 64
KB.
Note: For a server, please use a lower stripe size, and for a multimedia system, use a higher
stripe size.
5. When the RAID Volume Capacity item is highlighted, enter your RAID volume capacity and
hit <Enter>. The default setting is the maximum capacity allowed.
6. Press <Enter> when the Create Volume item is highlighted. A warning message displays.
Figure 34: Creating a RAID 10 (RAID 1 + RAID 0) Volume
Vig430P Motherboard Manual
63