Viglen Vig430p Manual page 12

WARNING!
To prevent damage to the power supply or Motherboard, please use a power supply that
contains a 24-pin and two 8-pin power connectors. Be sure to connect these connectors to the
24-pin (JPW1) and the two 8-pin (JPW2, JPW3) power connectors on the Motherboard for
adequate power supply to your system. Failure in doing so will void the manufacturer warranty
on your power supply and Motherboard.
Super I/O:
The wide range of functions integrated onto the Super I/O greatly reduces the number of
components required for interfacing with floppy disk drives. It also provides two high-speed,
16550 compatible serial communication ports (UARTs). Each UART includes a 16-byte
send/receive FIFO, a programmable baud rate generator, complete modem control capability
and a processor interrupt system. Both UARTs provide legacy speed with baud rate of up to
115.2 Kbps as well as an advanced speed with baud rates of 250 K, 500 K, or 1 Mb/s, which
support higher speed modems.
The Super I/O provides functions that comply with ACPI (Advanced Configuration and Power
Interface), which includes support of legacy and ACPI power management through an SMI or
SCI function pin. It also features auto power management to reduce power consumption.
11
Vig430P Motherboard Manual