Installing The Air Shroud - Supero SUPERSERVER 1018GR-T User Manual

Installing the Air Shroud

Air shrouds concentrate airflow to maximize fan efficiency. The main chassis air
shroud does not require screws to install. Note that each GPU card has its own
air shroud.
Installing the Air Shroud
1. Position the air shroud in the chassis as illustrated in Figure 6-6.
2. Align the notch (A) on the air shroud with the pin (B) on the add-on card bracket.
3. Slide the pin (B) into the back of the notch (A)
4. Lower the front of the air shroud over the fan tray, sliding the front notches (C)
over the pins on the fan tray (D).
1
D
1
C
Figure 6-6. Installing the Air Shroud
6-7
Chapter 6: Advanced Chassis Setup
1
A
1
B
1
D