1-1
Overview
The SuperServer 1018GR-T is a GPU-optimized server comprised of two
main subsystems: the SC118G-1K43BP 1U server chassis and the X10SRG-F
motherboard. Refer to our web site to learn which operating systems have been
certified for use with this system (www.supermicro.com).
•
SATA Accessories
One SAS backplane (BPN-SAS-118TQ)
Six 2.5" drive carriers (MCP-220-00047-0B)
SATA cables (four CBL-0484L; two CBL-SAST-0624)
•
Eight 4-cm counter-rotating fans (FAN-0141L4)
•
One air shroud (MCP-310-81802-0B)
•
One passive CPU heatsink (SNK-P0047PS)
•
Riser Cards
One for PCIe x8 low-profile card, above motherboard (RSC-R1U-E16R)
One for PCIe x16 card, left side (RSC-R1UG-E16-UP)
One for PCIe x16 card, right side (RSC-R1UG-E16R-UP)
•
Power cable for GPU cards, one 8 pin to two 6+2 pin (CBL-PWEX-0582)
•
One rail set (MCP-290-00054-0N)
For your system to work properly, please follow the links below to download all
necessary drivers/utilities and the user's manual for your server.
•
Supermicro product manuals:
•
Product drivers and utilities:
•
Product safety info:
If you have any questions, please contact our support team at:
support@supermicro.com.
Chapter 1
Introduction
http://www.supermicro.com/support/manuals/
ftp://ftp.supermicro.com
http://super-dev/about/policies/safety_information.cfm
1-1
Chapter 1: Introduction