Supero SUPERSERVER 1018GR-T User Manual page 62

SUPERSERVER 1018GR-T User's Manual
Jumper Description
JBR1 BIOS Recovery
JBRSET1 FIQ Request
JBT1 CMOS Clear
JI2C1/JI2C2 SMB to PCI Slots
JPB1 BMC Enable
JPG1 Onboard VGA Enable
JPL1/JPL2 LAN1/LAN2 Enable/Disable
JPME2 Intel Manufacturing Mode Select
JVRM1 VRM SMB Clock (to BMC or PCH)
JVRM2 VRM SMB Data (to BMC or PCH)
JWD1 Watch Dog Timer Reset
LED Description
LEDM1 IPMI Heartbeart
LE2 Power On LED
LE1 Unit ID LED
Notes
Jumpers not indicated are for test purposes only.
" " indicates the location of Pin 1.
Motherboard Jumpers
Motherboard LED Indicators
Color/State
Green: Blinking
Green: Solid On
Blue: Solid On
5-14
Default
Pins 1-2: (Normal)
Pins 1-2 (Normal)
See Chapter 2
Pins 1-2 (Enabled)
Pins 1-2 (Enabled)
Pins 1-2 (Enabled)
Pins 1-2 (Enabled)
Pins 1-2 (Enabled)
Pins 1-2 (BMC, Normal)
Pins 1-2 (BMC, Normal)
Pins 1-2 (Reset)
Status
IPMI Normal
System is On/Running
Unit ID Switch is On