Installing The Air Shroud - Supero SUPERSERVER 1028GR-TR User Manual

SUPERSERVER 1028GR-TR/TRT Series User's Manual

Installing the Air Shroud

Air shrouds concentrate airflow to maximize fan efficiency. The SC118GH chassis
has an air shroud for each GPU and one for the serverboard. The serverboard air
shroud does not require screws to install.
Installing the Air Shroud
1. Position the air shroud in the chassis as illustrated in Figure 6-9.
2. Align the notch on the air shroud with the pin on the expansion card bracket.
3. Slide the pin into the back of the notch.
4. Lower the front of the air shroud over the fan tray, sliding the front notches over
the pins on the fan tray.
Figure 6-9. Installing the Air Shroud
6-10