Sliding The Chassis Onto The Rack Rails - Supero SUPERSERVER 1018GR-T User Manual

SUPERSERVER 1018GR-T User's Manual

Sliding the Chassis onto the Rack Rails

Installing the Chassis into a Rack
1. Align the chassis rails with the front of the rack rails.
2. Slide the chassis rails into the rack rails, keeping the pressure even on both
sides. The spring latch engages when the chassis is part way in. Push the server
completely into the rack.
3. (Optional) Insert and tighten the thumbscrews that hold the front of the server
to the rack.
Note: The figure above is for illustrative purposes only. Always install servers at
the bottom of the rack first.
Warning: Do not pick up the server with the front handles. They are designed
to pull the system from a rack only.
Figure 2-5. Installing the Server into a Rack
2-8