5-10 Onboard Indicators - Supero SUPERSERVER 1018GR-T User Manual

SUPERSERVER 1018GR-T User's Manual
Manufacturer Mode Select
(JPME2)
Close this jumper to bypass SPI flash
security and force the system to use
the Manufacturer Mode, which will
allow the user to flash the system
firmware from a host server to modify
system settings. See the table on the
right for jumper settings.
I C Bus for VRM
2
Jumpers JVRM1 and JVRM2 allow the
BMC or the PCH to access CPU and
memory VRM controllers. See the table
on the right for jumper settings.

5-10 Onboard Indicators

LAN1/2 Port LEDs
The Ethernet ports have two LEDs. On
each port, the yellow LED indicates
activity, while the Link LED may be green,
amber or off to indicate the speed of the
connection. See the table on the right
for the functions associated with the
connection speed LED.
IPMI Heartbeat LED (LEDM1)
The IPMI Heartbeat LED is located at
LEDM1. When LEDM1 blinks, the IPMI
feature is functioning properly. Refer to the
table on the right for details. Also see the
layout below for the LED location.
Manufacturer Mode (JPME2)
Jumper Settings
Setting
Pins 1-2
Pins 2-3
Pin Defintions
Pin # Definition
1-2 BMC (Default)
2-3 PCH
Link LED
LED Color
Off
Green
Amber
IPMI Heartbeat LED Indicator
Color/State
Green: Blinking
Off
5-24
Definition
Normal (Default)
Manufacture Mode
VRM
LAN
Activity LED
LAN
Link LEDs
Definition
No Connection or 10 Mbps
100 Mbps
1 Gbps
LED Settings
Definition
IPMI is ready for use
IPMI Off