Table of Contents
Advertisement
SUPERSERVER 1018GR-T User's Manual
3-2
Control Panel Buttons
The chassis includes two push-buttons that control power to the system.
Universal ID: Press this button to toggle the universal identifier LED. A blue light
on front and back help an operator find this server in a rack of many.
Power: The main power switch is used to apply or remove power from the power
supply to the server. Turning off system power with this button removes the main
power but maintains standby power. To perform maintenance tasks, you must unplug
system before servicing.
4-3
Control Panel LEDs
There are five LEDs that provide status information about the system.
Information LED: Alerts operator of several states, as noted in the table below.
Status
Continuously on and red
Blinking red (1Hz)
Blinking red (0.25Hz)
Solid blue
Blinking blue
NIC2: Indicates network activity on GLAN2 when flashing.
Information LED
An overheat condition has occured.
(This may be caused by cable congestion.)
Fan failure, check for an inoperative fan.
Power failure, check for a non-operational power supply.
Local UID has been activated. Use this function to locate
the server in a rack mount environment.
Remote UID is on. Use this function to identify the
server from a remote location.
3-2
Description
Advertisement
Table of Contents
