5-10 Onboard Indicators - Supero 2122TG-HIBQRF User Manual

A+ SERVER 2122TG-HIBQRF/HTRF USER'S MANUAL

5-10 Onboard Indicators

LAN LEDs
The Ethernet ports (located beside the VGA
port) have two LEDs. On each Gb LAN port,
one LED blinks to indicate activity while the
other may be green, amber or off to indicate
the speed of the connection. See the table
on the right for the functions associated with
the connection speed LED.
Dedicated IPMI LAN LEDs
A dedicated IPMI LAN is also included on
the H8DGT-HIBQF/HF serverboard. The
amber LED on the right of the IPMI LAN
port indicates activity, while the green
LED on the left indicates the speed of the
connection. See the table at right for more
information.
IPMI LED
The serverboard contains an IPMI LED
(DP1) located near the corner above the
PCI-E slots. When this LED is lit, it means a
connection is active for the built-in IPMI on
the serverboard.
Note: This LED is not installed on non-IPMI
boards.
Power LED
DP2 is an Onboard Power LED. When
this LED is lit, it means power is present
on the serverboard. Be sure to turn off the
system and unplug the power cord(s) before
removing or installing components.
(Connection Speed
LED Color
Off
Green
Amber
IPMI LAN Link LED
(Left) & Activity LED (Right)
Color
Green:
Solid
Amber
Blinking
State System Status
On
Off
State System Status
On
Off
5-18
LAN LED
Indicator)
Definition
10 MHz
100 MHz
1 GHz
Status Definition
Link 100 Mb/s
(Left)
Activity Active
(Right)
IPMI LED (DP1)
Active connection
No connection
Power LED
(DP2)
Standby power present
on motherboard
No power connected