Table of Contents
Advertisement
BMC-Failure LED Enable
Use the jumper JFLED2 to enable BMC-
Failure LED indicator to indicate a BMC
failure. See the table on the right for
jumper settings. The default setting is
Closed to disable the jumper.
5-10 Onboard Indicators
GLAN LEDs
There are two GLAN ports (JLAN1/2)
on the motherboard. Each Ethernet LAN
port has two LEDs. The Yellow LED
on the right indicates connection and
activity. The Link LED on the left side
may be green, amber or off to indicate
the speed of the connection. See the
tables at right for more information.
IPMI Dedicated LAN LEDs
In addition to GLAN 1/2, an IPMI
Dedicated LAN is also located on the I/O
Backplane. The amber LED on the right
indicates connection and activity, while
the green LED on the left indicates the
speed of the connection. See the tables
at right for more information.
Chapter 5: Advanced Motherboard Setup
BMC Support Enable
Jumper Settings
Jumper Setting
Open
Closed
Link Speed
LED
GLAN Activity Indicator
(Right) LED Settings
Color
Off
Yellow
LAN Connection Speed
Indicator (Left) LED Settings
LED Color
Off
Green
Amber
Link LED
Link/Speed LED (Left)
& Activity LED (Right)
Color
Status
Off
Green:
Solid
Amber
Blinking
5-21
Defi nition
Enabled
Disabled (Default)
GLAN LED
Activity
LED
Status
Defi nition
No Connections
Flashing
Active
Defi nition
10 MHz
100 MHz
1 GHz
IPMI LAN
Activity LED
IPMI LAN
Defi nition
Off
No Connection
Link/
100 Mb/s
Speed
(Left)
Activity
Active
(Right)
Advertisement
Table of Contents
