Analog Input - GE 750 Instruction Manual

6 ACTUAL VALUES
The relay provides the ability to monitor any external quantity via an auxiliary current input called the analog
input.

ANALOG INPUT

[ENTER] for more
ANALOG INPUT:
0 µA
ANALOG INPUT:
0 µA
/min
ANALOG INPUT:
0 µA
/hour
GE Power Management
Courtesy of NationalSwitchgear.com
The Analog Input actual values path is:
\ ACTUAL VALUES \ A2 METERING \ ANALOG INPUT
This message displays the scaled value of the analog input, as defined in
MONITORING \ ANALOG INPUT \ ANALOG INPUT SETUP
the name programmed in setpoint message
ANALOG INPUT SETUP \ ANALOG INPUT NAME
tory default 'ANALOG INPUT'. The name of the units programmed in the set-
point message
S6 MONITORING \ ANALOG INPUT \ ANALOG INPUT SETUP \ ANALOG
will be displayed instead of the factory default 'µA'.
INPUT UNITS
This message displays the analog input rate of change per minute.
This message displays the analog input rate of change per hour.
750/760 Feeder Management Relay
6.3 A2 METERING
6.3.9 ANALOG INPUT
. In this actual values display,
S6 MONITORING \ ANALOG INPUT \
will be displayed instead of the fac-
S6
6
6 -
15