Clear Data; Description; Settings - GE 750 Instruction Manual

8.11 CLEAR DATA

8.11 CLEAR DATA
The following commands are used to clear specific memory functions after the data has been read by an oper-
ator.
CLEAR DATA
[ENTER] for more
CLEAR ENERGY USE
DATA? No
CLEAR MAX DEMAND
DATA? No
CLEAR EVENT RECORDER
DATA? No
8
8-
12
Courtesy of NationalSwitchgear.com
The Clear Data commands path is:
\ SETPOINTS \ S1 RELAY SETUP \ CLEAR DATA
Range: Yes, No
Enter Yes to clear all the accumulated power consumption data under the
actual values subgroup
A2 METERING \ ENERGY. THE ENERGY USE DATA LAST
date is updated to the current date upon issuing this command.
RESET
Range: Yes, No
Enter Yes to clear all maximum demand data values under the actual values
subgroup
A2 METERING \ DEMAND
PHASE B CURRENT DEMAND
,
DEMAND MAX REACTIVE POWER DEMAND
The
DEMAND DATA LAST RESET
this command.
Range: Yes, No
The event recorder saves the most recent 128 events, automatically overwrit-
ing the oldest event. Enter Yes to clear all recorded event data in actual values
page . The
A4 EVENT RECORDER
the current date upon issuing this command.
750/760 Feeder Management Relay
, namely,
MAX PHASE A CURRENT DEMAND
,
MAX PHASE C CURRENT DEMAND
, and
MAX APPARENT POWER DEMAND
date is updated to the current date upon issuing
EVENT RECORDER LAST RESET
8 S1 RELAY SETUP

8.11.1 DESCRIPTION

8.11.2 SETTINGS

,
MAX
,
MAX REAL POWER
.
date is updated to
GE Power Management