Configuring Member Ports For A Smart Link Group - HPE FlexFabric 5700 Series Configuration Manual

Step
3. Configure the
VLAN-to-instance mapping
table.
4. Manually activate MST
region configuration.
5. (Optional.) Display the
currently activated
configuration information of
the MST region.
6. Return to system view.
7. Create a smart link group
and enter smart link group
view.
8. Configure protected VLANs
for the smart link group.

Configuring member ports for a smart link group

You can configure member ports for a smart link group either in smart link group view or in interface
view. The configurations made in these two views have the same effect.
In smart link group view
To configure member ports for a smart link group in smart link group view:
Step
1. Enter system view.
2. Create a smart link group and
enter smart link group view.
3. Configure member ports for a
smart link group.
In interface view
To configure member ports for a smart link group in interface view:
Step
1. Enter system view.
2. Enter Layer 2 Ethernet
interface view or Layer 2
aggregate interface view.
3. Configure member ports for a
Command
•
Method 1:
instance instance-id vlan
vlan-list
•
Method 2:
vlan-mapping modulo
modulo
active region-configuration
display stp
region-configuration
quit
smart-link group group-id
protected-vlan
reference-instance
instance-id-list
Command
system-view
smart-link group group-id
port interface-type interface-number
{ primary | secondary }
Command
system-view
interface interface-type
interface-number
port smart-link group group-id
93
Remarks
All VLANs in an MST region are
mapped to CIST (MSTI 0) by
default.
For more information about the
commands, see Layer 2—LAN
Switching Command Reference.
For more information about the
command, see Layer 2—LAN
Switching Command Reference.
Available in any view.
The output of the command
includes VLAN-to-instance
mappings.
For more information about the
command, see Layer 2—LAN
Switching Command Reference.
N/A
N/A
By default, no protected VLAN is
configured for a smart link group.
Remarks
N/A
N/A
By default, no member port is
configured for a smart link
group.
Remarks
N/A
N/A
By default, a port is not a