Configuring Rrpp Nodes - HPE FlexFabric 5700 Series Configuration Manual

Step
interface view or Layer 2
aggregate interface view.
3. Configure the link type of the
interface as trunk.
4. Assign the trunk port to the
protected VLANs of the
RRPP domain.
5. Disable the spanning tree
feature.

Configuring RRPP nodes

The maximum number of rings that can be configured on a device in all RRPP domains is 128.
If a device carries multiple RRPP rings in an RRPP domain, it can only be an edge node or an
assistant edge node on a subring.
Specifying a master node
Step
1. Enter system view.
2. Enter RRPP domain
view.
3. Specify the current
device as the master
node of the ring, and
specify the primary port
and the secondary port.
Specifying a transit node
Step
1. Enter system view.
2. Enter RRPP domain
view.
3. Specify the current
device as a transit node
of the ring, and specify
the primary port and the
secondary port.
Command
interface-number
port link-type trunk
port trunk permit vlan
{ vlan-id-list | all }
undo stp enable
Command
system-view
rrpp domain domain-id
ring ring-id node-mode master
[ primary-port interface-type
interface-number ] [ secondary-port
interface-type interface-number ] level
level-value
Command
system-view
rrpp domain domain-id
ring ring-id node-mode transit
[ primary-port interface-type
interface-number ] [ secondary-port
interface-type interface-number ] level
level-value
55
Remarks
By default, the link type of an interface is
access.
For more information about the command,
see Layer 2—LAN Switching Command
Reference.
By default, a trunk port allows only packets
from VLAN 1 to pass through.
RRPP ports always allow packets from the
control VLANs to pass through.
For more information about the command,
see Layer 2—LAN Switching Command
Reference.
By default, the spanning tree feature is
enabled.
For more information about the command,
see Layer 2—LAN Switching Command
Reference.
Remarks
N/A
N/A
By default, the device is not a
node of the RRPP ring.
Remarks
N/A
N/A
By default, the device is not a
node of the RRPP ring.