Configuring Errored Frame Seconds Event Detection - HPE FlexFabric 5700 Series Configuration Manual

Step
1. Enter system view.
2. Configure the errored frame
period event detection
window.
3. Configure the errored frame
period event triggering
threshold.
To configure errored frame period event detection on a port:
Step
1. Enter system view.
2. Enter Layer 2/Layer 3
Ethernet port view.
3. Configure the errored frame
period event detection
window.
4. Configure the errored frame
period event triggering
threshold.

Configuring errored frame seconds event detection

CAUTION:
Make sure the errored frame seconds triggering threshold is less than the errored frame seconds
detection window. Otherwise, no errored frame seconds event can be generated.
An errored frame seconds event occurs when the number of times that errored frame seconds are
detected on a port in the detection window (specified detection interval) exceeds the predefined
threshold.
You can configure this command in system view or port view. The configuration in system view takes
effect on all ports, and the configuration in port view takes effect on the specified port. For a port, the
configuration in port view takes precedence.
To configure errored frame seconds event detection globally:
Step
1. Enter system view.
2. Configure the errored frame
seconds event detection
window.
3. Configure the errored frame
seconds event triggering
threshold.
To configure errored frame seconds event detection on a port:
Step
1. Enter system view.
Command
system-view
oam global
errored-frame-period window
window-value
oam global
errored-frame-period threshold
threshold-value
Command
system-view
interface interface-type
interface-number
oam errored-frame-period
window window-value
oam errored-frame-period
threshold threshold-value
Command
system-view
oam global
errored-frame-seconds window
window-value
oam global
errored-frame-seconds
threshold threshold-value
Command
system-view
7
Remarks
N/A
By default, the errored frame
period event detection window is
10000000.
By default, the errored frame
period event triggering threshold
is 1.
Remarks
N/A
N/A
By default, an interface uses the
value configured globally.
By default, an interface uses the
value configured globally.
Remarks
N/A
By default, the errored frame
seconds event detection window
is 60000 milliseconds.
By default, the errored frame
seconds event triggering
threshold is 1.
Remarks
N/A