Button; Normal Mode; The Hz Function + Activation Of The Hold Mode - AEMC 205 User Manual

2.5

BUTTON

This button is used to display the frequency measurements of a signal.
NOTE: This button is not functional in the DC mode.
2.5.1

Normal Mode

Successive
presses on
short
long
then short
2.5.2

The Hz Function + Activation of the HOLD Mode

Successive
presses on
Displays:
- The frequency of the signal measured
- The present voltage (V) or current (A)
measurement
Displays:
- The apparent power (VA)
- The reactive power (var)
- The power factor (PF)
- The frequency of the signal
- The active power (W)
- Enters or exits from the level of harmonics
(THD) calculation and display mode
- Selects THDf, THDr or the frequency of the
fundamental
- Holds the last frequency reading
- Successively displays the last held
frequency, then the voltage or the current
- Displays the stored values of THD
THD , then of the frequency of the
r
fundamental
NOTE: Pressing the
-
returns to realtime measurement updates.
18
Function
Function
button again
, then of
f