Quick Menu - Danfoss VLTAutomationDrive FC 360 Quick Manual

User Interface and Programm...

4.2 Quick Menu

The Quick Menu gives easy access to the most frequently
used parameters.
1. To enter the Quick Menu, press [Menu] key until
indicator in display is placed above Quick Menu.
2.
Use [
press [OK].
3.
Use [
the Quick Menu.
4 4
4. Press [OK] to select a parameter.
5.
Use [
setting.
6. Press [OK] to accept the change.
7. To exit, press either [Back] twice (or three times if
in QM" and QM3) to enter Status, or press [Menu]
once to enter Main Menu.
20
▲ ▼
] [ ] to select either QM1 or QM2, then
▲ ▼
] [ ] to browse through the parameters in
▲ ▼
] [ ] to change the value of a parameter
MG06A102 - VLT
®
VLT AutomationDrive FC 360 Quick Guide
®
is a registered Danfoss trademark