Danfoss VLTAutomationDrive FC 360 Quick Manual page 41

Specifications
Frequency converter
Typical Shaft Output [kW]
IP20
Output current
Continuous (3x380-439 V) [A]
Continuous (3x440-480 V) [A]
Intermittent (60 s overload) [A]
Continuous kVA (400 V AC) [kVA]
Continuous kVA 460 V AC) [kVA]
Max. input current
Continuous (3x380-439 V ) [A]
Continuous (3x440-480 V) [A]
Intermittent (60 s overload) [A]
Additional specifications
Max. cable size (mains, motor,
brake) [mm 2 / AWG] 2)
Estimated power loss at rated max.
3)
load [W]
Weight enclosure IP20 [kg]
4)
Efficiency
Table 8.3 Mains Supply 3x380-480 V AC - Normal Duty
For fuse ratings, see 8.3 Fuse Specifications
1) Heavy duty = 160% current during 60 s, Normal duty = 110% current during 60 s.
2) American Wire Gauge.
3) The typical power loss is at nominal load conditions and expected to be within
cable conditions).
Values are based on a typical motor efficiency (eff2/eff3 border line). Motors with lower efficiency will also add to the power loss in the
frequency converter and opposite.
If the switching frequency is increased compared to the default setting, the power losses may rise significantly.
LCP and typical control card power consumptions are included. Further options and customer load may add up to 30 W to the losses.
(Though typical only 4 W extra for a fully loaded control card, or fieldbus, or options for slot B).
Although measurements are made with state of the art equipment, some measurement inaccuracy must be allowed for (
4) Measured using 5 m screened motor cables at rated load and rated frequency.
®
VLT AutomationDrive FC 360 Quick Guide
Q11K Q15K Q18K
11 15 18.5
J4 J4 J5
23 31 37
21 27 34
25.3 34.1 40.7
22.1 29.9 35.2
18.4 24.7 29.3
24.3 32.9 38.7
16 mm 2
9.4 9.5 12.3
1)
®
MG06A102 - VLT is a registered Danfoss trademark
Q22K Q30K Q37K
22 30 37
J5 J6 J6
42.5
40
46.8
41.5
34.6
45.7
50 mm 2
12.5
± 15% (tolerence relates to variety in voltage and
Q45K Q55K Q75K
45 55 75
J6 J7 J7
85 mm 2
± 5%).
37
8 8