Switching The Unit On And Starting The Software; Selecting The 3D Acquisition System - Sirona inEos Blue Operating Instructions Manual

6 Initial installation of the software

6.3 Switching the unit on and starting the software

20
6.3
Switching the unit on and starting the software
Let unit dry off after storage Switching the unit on and starting the software
NOTICE
Do not put the unit into operation at low temperatures!
If you move the unit to the operating site from a cold environment,
condensation may form and result in a short circuit.
✔
Install the unit at room temperature.
➢ Wait until the unit has reached room temperature and is absolutely
dry.
The unit is dry and can be put into operation.
1. Switch the unit on at the main switch.
2. Start the software at the PC via the Windows start menu.
6.4

Selecting the 3D acquisition system

Selecting the 3D acquisition system
"Settings"
1. Click
software.
The menu for selection of the 3D acquisition system opens.
"inEos"
2. Select
"OK"
3. Click the
Operating Instructions Sirona Dental CAD/CAM System
"Configuration" "Acquisition system"
/ /
.
button.
Sirona Dental Systems GmbH
in the user
63 33 632 D3446
D3446.201.02.03.23 07.2011