Ricoh 1000L Field Service Manual page 210

BITSW 4
Bit No.
0 Hang-up decision when a negative code (RTN or PIN)
is received.
0; No hang-up
1
Echo countermeasure
0; Enabled
When the same code that was sent is received,
it is ignored.
2 CNG signal transmission in manual transmission mode
0; Enabled
3 DIS detection times
(Echo countermeasure for transmission)
0; Once
4 Page retransmission times
5 0
}
None
0
6 Printing condition of TCR
0; Results of communications which were disconnected
before transmission/reception of image data are not
printed.
1; All communications are listed except for telephone
calls
7 Do not use.
Function
1; Hang-up
1; Twice
1
}
Once
0
If this is set to 1, the machine will disconnect
instead of ignoring echoes.
If this is set to 1, the machine waits for
a second DIS before returning DCS.
0 1
} }
Twice
1 1
Keep at 1.
A - 7
Remarks
Three times