Ricoh 1000L Field Service Manual page 74

Parameter
No.
00 Acceptable ringing signal frequency
: Range 1, upper limit
01 Acceptable ringing signal frequency
: Range 1, lower limit
Acceptable ringing signal frequency
02
: Range 2, upper limit
03 Acceptable ringing signal frequency
: Range 2, lower limit
04 Number of rings until a call is detected
05 Minimum required length of the first ring
Minimum required length of the second and
06
subsequent rings
Reset time
07
Time between the closing of relay DS and the
08
opening of relay DI (T0)
Time that relay DI is open. (T1)
09
10 Time that relay DI is closed. (T2)
Time between the final closure of relay DI
11
and the opening of relay DS. (T3)
Description
5 - 23
Formula
(Hz)
(Hz)
(Hz)
(Hz)
N (times)
Note 3
Nx20 (ms)
Nx20 (ms)
Nx40 (ms)
Notes 1, 2
Nx1 (ms)
Note 1
Nx1 (ms)
Note 1
Nx1 (ms)
Notes 1, 2
Nx1 (ms)
Remarks