Understanding The Printer Sounds - Intermec PB51 User Manual

Chapter 1 — Using the PB51 Mobile Label and Receipt Printer
There is only one LED on the PB51 printer: the Read y-to-Work ™
indicator.
Understanding the Ready-to-Work Indicator
Indicator State
O When the light is o , it can mean one of severa
On
Blinking

Understanding the Printer Sounds

The PB51 plays sounds in response to several action s that you can
take with the printer. Use the following table to understand when the
sounds occur and what they mean.
Understanding the Printer Sounds
Sound
Power
Hardware
Button
Error
6
Description
conditions:
The printer is in Standby mode.
The printer is in Info mode.
The printer is in Setup mode.
The PB51 is powered on and operating.
A blinking light can mean one of several co nditions:
The printer is out of paper.
The media cover is open.
There is a printer error that requires you to perfo rm an
action. For a list of possible problems, see
"Troubleshooting the PB51" on page 42
Occurs When:
You supply power (battery or AC adapter) to the
printer.
The PB51 starts charging the battery.
You open the media door, close the media door, or insert a
cable.
You press any of the PB51 buttons.
The printer cannot feed paper or print a job because of
a hardware issue such as the media door open, a paper
jam, or there is no media.
An error occurs such as a paper jam or a print erro r.
PB51 Mobile Label and Receipt Printer User's Guide
l
.