Printing A Testprint - Intermec PB51 User Manual

7 Press and hold the Feed button for more than two seconds to

Printing a Testprint

After you have loaded media in the printer, you are ready to print a
testprint. You can choose from several testprint options for each type
of rmware. If you cannot get the testprint information to print, see
"Troubleshooting the PB51" on page 42
To print a testprint with a PB51 loaded with IPL
1 Press the Setup button.
2 Press
3 Press
4 Press
5 Press
6 Press
7 Press
To print a testprint with a PB51 loaded with Finger print rmware
1 Press the Setup button.
2 Press
3 Press
4 Press
5 Press
6 Press
7 Press
Before you can print a self test with ESC/P rmwar e, you need to
establish communications between the PB51 and your network. For
help, see
To print a self test with a PB51 loaded with ESC/P
PB51 Mobile Label and Receipt Printer User's Guide
Chapter 1 — Using the PB51 Mobile Label and Receipt Printer
calibrate the media.
until you reach Test/Service .
to enter the Test/Service menu system.
to enter the Testprint Con g menu.
to enter the Con g menu.
to choose a testprint.
to print the Con g testprint of your choice .
until you reach Print Defs .
to enter the Print Defs menu system.
until you reach Testprint .
to enter the Testprint menu.
to choose a testprint.
to print the testprint of your choice.
"Establishing Communications With a Host" on page 2
Send the ESC EZ{TP} command to the printer.
.
rmware
rmware
7.
15