Understanding Test Mode - Intermec PB51 User Manual

Sample Error Mode Screen
If you encounter an error message, see
Messages" on page 42

Understanding Test Mode

Use Test mode to verify printer settings, print tes t labels, restore
factory default settings, or enter Dump mode for tr oubleshooting
purposes. Two test modes are available: Test mode and Extended Test
mode.
Using Test Mode
Test mode is a simple sequence of events which requ ires little user
interaction. Extended Test mode requires more user interaction and
lets you choose which actions you want the printer to perform.
To enter Test mode
1 Make sure the printer is in Ready mode and is loade d with media.
2 Press the Feed and Standby buttons at the same time and hold
3 Release both buttons. The printer performs a test feed (sensor
4 Press Feed to exit Dump mode.
After you exit Dump mode, the printer returns to Re ady mode. For
more information on Dump mode, see
Communication Problems" on page 46
PB51 Mobile Label and Receipt Printer User's Guide
PAPER FAULT
for information on how to x the problem.
until Select Media appears on the screen and it displays the type of
media you are using.
calibration), prints a series of test labels, and t hen enters Dump
mode.
The printer is now in Dump mode and it scans the
communication ports. Any characters received on the
communication ports are printed.
Chapter 2 — Con guring the PB51
"Understanding Error
"Troubleshooting
.
21