Changing Con Guration Settings From Printset; Changing Con Guration Settings Using The Command Line - Intermec PB51 User Manual

Changing Con guration Settings From PrintSet

PrintSet Version 4.2 (or higher) is a printer con
you can download from the Intermec web site. PrintS et can
communicate with your printer through a serial cabl e or a network
connection. It works on all PCs running Windows 98 (or later).
PrintSet allows you to easily change all of the setup parameters. It also
includes setup wizards to guide you through some common
con guration tasks.
Changing Con guration Settings Using the Command
Line
You can change con guration parameters by sending commands
directly to the printer using your terminal program (HyperTerminal)
and a serial or network connection.
If your printer uses the Fingerprint language, you use the SETUP
command, followed by the node, subnode, and paramet ers setting.
Here is a Fingerprint example that sets your media setting to labels
with gaps:
SETUP "MEDIA,MEDIA TYPE,LABEL (w GAPS)"
If your printer uses the IPL language, you would se nd this command:
<STX><SI>T1<ETX>
Fingerprint automatically sends feedback to HyperTe rminal as you
type. If you want to see what you are typing with IPL, you need to
complete the following procedure.
To see IPL commands as you type
1 From the HyperTerminal menu, select File > Properties > the
2 Click the ASCII Setup button.
3 Select Echo typed characters locally .
4 Click OK twice.
For more information on how to change con guration settings, see
either the Fingerprint Command Reference Manual
the IPL Command Reference Manual (P/N 937-007-xxx). You can
download both documents from the Intermec web site at
www.intermec.com
PB51 Mobile Label and Receipt Printer User's Guide
Settings tab.
.
Chapter 2 — Con guring the PB51
guration tool that
(P/N 937-005-xxx) or
25