Table of Contents
Advertisement
KTD-N0904-E
Power Consumption
3.2
The following items were used in the test setup:
1. Low Power Setup (E3815):
Standard system configuration equipped withInternal graphics, 1x 500GB SATA disk, mSATA 40GB, 1x
SODIMM (2GB Modules), DP Monitor, USB Keyboard & Mouse. 1x 8GB USB2.0 Stick, 1x LAN Gigabit.
Mid Power Setup (E3826):
Standard system configuration equipped withInternal graphics, 1x 500GB SATA disk, mSATA 40GB, 1x
SODIMM (4GB Modules), DP Monitor, USB Keyboard & Mouse. 2x 8GB USB2.0 Stick,1x LAN Gigabit.
High Power Setup (E3845):
Standard system configuration equipped withInternal graphics, 1x 500GB SATA disk, mSATA 40GB, 1x
SODIMM (8GB Modules), DP Monitor, LVDS, USB Keyboard & Mouse. 2x 8GB USB2.0 Stick,1x 16GB
USB3.0 Stick,1x LAN Gigabit.
2. Active cooler (High & Mid), Passive cooler (Low)
3. USB Keyboard/Mouse
4. 2.5" SATA HDD external power.
5. Agilent E3634A @ 5V, 4A
6. Lecroy SDA820Zi-A Oscilloscope
7. Lecroy AP015 Current Probe
8. USB Flash 1x 8GB USB 2.0
9. USB Flash 1x 16GB USB 3.0
10. DP Monitor 1200x1600
11. LVDS Display 1200x1600
12. mSATA: 40GB
13. Memory: 8/4/2 GB SODIMM 1333 PC3-10600
Power measurrements:
Low Power Setup (E3815)
DOS Idle
760mA - 3.8W
Windows 7, 3DMARK AE (first scene) +Burn in test 7.1
1320mA - 6.6W
Windows 7, idle, desktop, no applications running
848mA - 4.24W
S3 Mode
247mA - 1.235W
S4 Mode
239mA - 1.195W
S5 Mode
214mA - 1.070W
Page 13
pITX-E38
Mid Power Setup (E3826)
935mA - 4.675W
1810mA - 9.05W
1130mA - 5.65W
255mA - 1.275W
238mA - 1.19W
219mA - 1.095W
pITX-E38 Users Guide
System Specification
Gnd
+5V
Current
Tektronix
probe
TDS5104B
Note that power consumption of the
Display and HDD are not included.
High Power Setup (E3845)
1150mA - 5.75W
2270mA - 11.35W
1250mA - 6.25W
266mA - 1.33W
236mA - 1.18W
228mA - 1.14
+5V
PSU
Advertisement
Table of Contents
