Power Consumption - Kontron mITX-BDW-U Manual


OpenGL* 4.0, OpenGL* 4.2 support

DP1 & DP2

16/32bit colours in WQXGA 3840x2160 @ 60 Hz.

Max HDMI resolution 4096x2304 @ 24 Hz

DisplayPort standard 1.2a

LVDS

One or two pixels per clock, up to 1920x1200 - 24b bit colors.

12V for backlight, up to 2.5A

3.3V or 5V for panel power, up to 1.0A

PWM Brightness/Dimming

VESA and JEIDA color coding
3-displays Configurations:
DISPLAY1 DISPLAY2
LVDS DP
LVDS HDMI
LVDS HDMI
By HDMI means using "DP to HDMI passive adapter".
If using "Active adapter" the HDMI resolution will be increased to match "DP" in above table.
DP Adapters
Use of DP Adapter Converters (3
The DP to HDMI supports the HDMI 1.4a specification including audio codec.
DP to HDMI
PN 1045-5781
For alle the above adapter's the maximum resolution is: 1920 x 1200. Extension cable available:
05.06.

POWER CONSUMPTION

In order to ensure safe operation of the board, the input power supply must monitor the supply voltage
and shut down if the supply is out of range – refer to the actual power supply specification. Please note,
MITX-BDW-U (KTD-NO886-B)
DISPLAY3
DISPLAY1
DP 1920x1200
DP 1920x1200
HDMI 1920x1200
rd
party accessories) can provide HDMI panel support.
Cable DP Extender cable 200mm
PN1051-7619
www.kontron.com
MAX RESOLUTION @60 HZ
DISPLAY2
3840x2160
2560x1600
2560x1600
DISPLAY3
3840x2160
3840x2160
2560x1600
// 17 - 104