Kontron pITX-E38 Manual page 41

KTD-N0904-E
Function
NumLock:
Timeout
CSM Support
Quick Boot
Diagnostic Splash Screen
Diagnostic Summary Screen
BIOS Level USB
Console Redirection
Allow Hotkey in S4 resume
UEFI Boot
Legacy Boot
Boot in Legacy Video Mode
Load OPROM
Note 1: Use either digit keys to enter value (0 – 99) or +/- keys to increase/decrease value.
Page 38
Selection Description
On
Select Power-on state for NumLock.
Off
Number of seconds that P.O.S.T will wait for the user
0 Note 1
input before booting.
Compatibility Support Module that provides backward
No
compatibility services for legacy BIOS services, like
Yes
int10/int13, dependent OS.
Disabled
Enable/Disable quick boot.
Enabled
If you select 'Enabled' the diagnostic splash screen
Disabled
always displays during boot. If you select 'Disabled'
the diagnostic splash screen does not display unless
Enabled
you press HOTKEY during boot.
Disabled
Display the diagnostic summary screen during boot.
Enabled
Enable/Disable all BIOS support for USB in order to
reduce boot time. Note that this will prevent using a
Disabled
USB biometric scanner such as a finger print reader
Enabled
to control access to setup, but does not prevent the
operating system from supporting such hardware.
Disabled
Enable/Disable Universal Console Redirection.
Enabled
Disabled
Enable hotkey detection when system resuming from
Enabled
Hibernate state.
Disabled
Enable the UEFI boot.
Enabled
Disabled
Enable the Legacy boot.
Enabled
Enable to force the display adapter to switch the
video mode to Text Mode 3 at the end of BIOS POST
Disabled
for non-UEFI boot mode (Legacy Boot). Some legacy
Enabled
software, such as DUET, requires that the BIOS
explicitly enter text video mode prior to boot.
All
Load all OPROMs or on demand according to the boot
device.
On Demand
pITX-E38 Users Guide
BIOS - Main