Usb Connectors (Io Area) - Kontron pITX-E38 Manual

KTD-N0904-E Page 19 IO-Area Connectors

USB Connectors (IO Area)

6.1
The pITX-E38 board contains support for 1 USB3.0/2.0 port (Lower USB port, USB0) and one USB2.0 port
(higher USB port, USB1) in the IO area.
USB 2.0 ports allowing data transfers up to 480Mb/s. The USB 3.0 port allowing data transfers up to 5Gb/s.
(Two internal USB ports are available via internal 4-pin connectors)
For USB2.0 cabling it is required to use only HiSpeed USB cable, specified in USB2.0 standard:
For USB3.0 cabling it is required to use only HiSpeed USB cable, specified in USB3.0 standard:
pITX-E38 Users Guide